Jewellery Care Guide

Jewellery Care Guide

A little care goes a long way. Follow these simple tips to help keep your Muki jewellery looking its best.

Everyday wear

Put your jewellery on last, after applying perfume, creams and cosmetics. Avoid direct contact with cleaning products and harsh chemicals. To minimise exposure to moisture, sweat and accidental damage, remove your pieces before showering, swimming, exercising or sleeping.

Cleaning

Warning: These instructions apply only to unplated brushed silver, not to plated jewellery. Do not use these methods on pearls, delicate stones or glued details. Baking soda and abrasive pads can alter the finish. Test on a small, inconspicuous area first, and contact us if you are unsure.

Brushed silver has fine, uniform surface lines that give it its distinctive matte appearance. Always clean gently in the direction of these lines, never in circular motions. Rubbing across the grain can alter the pattern and create uneven shiny patches.

Cleaning with a baking soda paste

Tarnish can settle into the fine grooves of brushed silver, where soapy water alone may not be enough.

You will need baking soda, a little water and a very soft toothbrush.

  1. Mix three parts baking soda with one part water to make a thick paste.
  2. Apply a small amount to the silver surface.
  3. Using the toothbrush, brush very gently, following the direction of the brushed lines.
  4. Rinse thoroughly with lukewarm water.
  5. Pat dry immediately with a clean, soft towel. If wiping is needed, follow the direction of the lines.

Restoring the brushed finish

Over time, or after using a polishing cloth, brushed silver may lose some of its matte texture and become shiny.

For a light touch-up on a plain, unplated silver surface:

  1. Take a brand-new, completely dry dish sponge.
  2. Using the green abrasive side, make very light, even strokes in one direction only, following the original brushed lines.
  3. Check the surface frequently and stop if the scratches look too deep or uneven.

This method creates new fine surface scratches and may change the original finish. Abrasive pads vary in coarseness, so always test a hidden area first. For an even finish, or for pieces with decorative details, we recommend professional refinishing.

Storage

Store each piece separately in a soft pouch or lined jewellery box to help prevent scratches and tangling.

Keep in mind

Care needs vary depending on the materials and finish of each piece. Always follow any specific instructions included with your jewellery. Plated finishes may gradually wear with use, and gentle handling can help preserve their appearance.

Need a little guidance?

If you’re unsure how to care for your piece, contact us before using any cleaning product. We’ll be happy to help.